Frog Scroll Saw Puzzle Pattern
What do you get if you cross a science fiction film with a toad?
Here is a handsome frog puzzle.
Mr. Frog is all dressed up in a red bow tie and button down white shirt, plus a big smile on his face.
Using a power sander or hand sand the wood on both sides. Cover the wood on one side with clear packaging tape to provide the saw blade with some lubrication as it cuts.
Make a copy of the pattern. After making a copy, cut around the outside edge of the pattern leaving a 1/4" to 1/2" of paper around the pattern lines.
Attach the pattern to the packaging tape with spray adhesive.
First saw the outside lines of the pattern with the #9 saw blade. Next, saw the individual pieces by cutting on the inside lines. Remove pattern and packaging tape.
Sand the individual pieces with fine sandpaper to smooth any imperfections. After the wood is nice and smooth, apply the sealer primer. After the sealer primer is dry, apply 2 coats of enamel, letting it dry between coats. Be careful not to get too much paint where the pieces join together.