Materials
3/4" Pine or Basswood
Clear*packing*tape
Sealer*primer*Kilz
Paint--enamel acrylic latex
Paint pens--painters speedball-fine
Sandpaper--fine
Spray*on*adhesive
Tools
Scroll saw or coping saw
#9 saw blade
Power sander (optional)
Paint brushes-small-foam or bristle
Instructions
Using a power sander or hand sand the wood on both
sides. Cover the wood on one side with clear*
packaging*tape to provide the saw blade with some
lubrication as it cuts.
Make a copy of the pattern. After making a copy, cut
around the outside edge of the pattern leaving a 1/4"
to 1/2" of paper around the pattern lines.
Attach the pattern to the packaging*tape with spray*
*adhesive.
First saw the outside lines of the pattern with the #9
saw blade. Next, saw the individual pieces by cutting
on the inside lines. Remove pattern and packaging*
*tape.
Sand the individual pieces with fine sandpaper to
smooth any imperfections. After the wood is nice and
smooth, apply the sealer*primer. After the sealer
primer is dry, apply two coats of enamel letting it
dry between coats. Be careful not to get too much
paint where the pieces join together.
| Game Pieces and Templates |
Search FreeWoodPuzzles.com:
