Church Decorative Bird House

Decorative bird house - Build a church bird house with a metal roof and assorted designs.

3/4 x 4 x 4" wood for two sides
3/4 x 5 x 6 1/2" wood for two ends
3/4 x 5 x 8" wood for bottom
1/2 x 6 x 2" wood for steeple
1/2 x 1 x 7" for front of bottom
Cabinet door handle
Ornament for front
1 1/4" finish nails
8 1/4 x 7" metal for roof
4--1" drywall screws
wire for hanging
ivory paint
gold paint

Tools--

Saw
7/8" drill bit
3/16" drill bit
Metal shears
Hammer

Instructions--

Paint steeple gold. Nail steeple to front end, 3 1/2" above roof peak.

Nail two ends and two sides to base and to each other. Nail front piece to bottom. Drill 7/8" hole in front end approx. 2 1/2" from bottom. Paint with ivory paint.

Drill four 3/16" holes and cut slot with metal shears in metal roof per drawing. Install with four screws.

Install cabinet door pull and any ornament of your choice.

Saw out cross from 1/4" wood. Paint white and nail to steeple.

Attach hanging wire to two diagionally opposite roof screws.