3/4" x 7" x 7" Pine or Basswood
Clear packaging tape (can purchase at Wal-Mart)
Sealer primer Kilz (can purchase at Wal-Mart)
Paint--enamel acrylic latex
Paint pens--painters speedball-fine
Scroll saw or coping saw
#9 saw blade
Power sander (optional)
Paint brushes - small foam or bristle
Using a power sander or hand sand the wood on both
sides. Cover the wood on one side with clear
packaging tape to provide the saw blade with some
lubrication as it cuts.
Make a copy of the pattern. After making a copy, cut
around the outside edge of the pattern leaving a 1/4"
to 1/2" of paper around the pattern lines.
Attach the pattern to the packaging tape with spray
First saw the outside lines of the pattern with the #9
saw blade. Next, saw the individual pieces by cutting
on the inside lines. Remove pattern and packaging
Sand the individual pieces with fine sandpaper to
smooth any imperfections. After the wood is nice and
smooth, apply the sealer primer. After the sealer
primer is dry, apply two coats of enamel letting it
dry between coats. Be careful not to get too much
paint where the pieces join together.